Inspection bodies verify measuring instruments

Measuring instruments are verified by inspection bodies approved by Tukes. When the verification of a measuring instrument is about to expire, the company responsible for the operation of the measuring device or another party using the measurement results orders verification from an inspection body.

Due to its work queues, the inspection body may move the time of verification by 4 months at maximum. The inspection body informs the customer of the decision to move the time of verification in writing.

Consumption measurement instruments, i.e. water, electrical energy, gas and thermal energy meters, can be verified in accordance with the procedures approved by the inspection body under the law.

 

Inspection body Identifier Verification services
offered by the inspection body
Scales Liquid fuel meters Beer taps

KIWA Inspecta Tarkastus
Head office
Sörnäistenkatu 2
00580 Helsinki
tel. +358 10 521 600

Verification orders
service number +358 10 521 680
Verification of measuring instruments – Inspecta

Offices: Hämeenlinna, Joensuu, Jyväskylä, Kemi, Kuopio, Lahti, Lappeenranta, Oulu, Seinäjoki, Tampere, Turku, Vantaa, Ylivieska

M03

KIWA Inspecta Tarkastus carries out all duties of an inspection body in accordance with the Measuring Instruments Act on all measuring instruments and non-automatic scales within the scope of application and methods of the act.

In addition, KIWA Inspecta Tarkastus act as a notified body in accordance with the NAWI Directive and the Measuring Instruments Directive with the identifier 0424.

x x x

PME-Control Oy
Luhtatie 4 A3
Address: Viitaharjuntie 4
66300 Jurva

Verification services:
+358 400 162 165

High power measurements:
+358 400 456 669

Operating area: entire Finland
https://www.pme-control.com/

M04

Inspection body as referred to
in the Measuring Instruments Act (707/2011)

  • liquid fuel meters, ethanol and beer
  • grain moisture meters
  • Non-automatic scales -
    scheduled verification,
    accuracy classes II, III and IV
  • Automatic scales, weights, other measuring instruments and systems – scheduled verification

In addition, PME-Control Oy act as a notified body in accordance with the NAWI Directive and the Measuring Instruments Directive with the identifier 2858. 

x x x

Aptepa Ky
P.O. Box 70, Ylimensalmentie 7
43501 Karstula
tel. +358 400 641 213
http://www.aptepa.fi/

M06

Scheduled verification of scales

  • non-automatic scales
  • automatic catchweighers
x    

DEKRA Industrial Oy
Tuupakankuja 1
01740 Vantaa
tel. +358 9 878 020
www.dekra.fi

M07

In accordance with the Measuring Instruments Act (707/2011),

  • duties of an inspection body concerning the scheduled verification and reverification of liquid meters
  x  

Table. Inspection bodies approved by Tukes for the in-service verification of measuring instruments. The inspection bodies carry out inspections of measuring instruments in accordance with their scope of accreditation.